Second Wind - Products - Power Measurement Product Options

Product Options

Current Input Options
The Phaser^® may be purchased with one of three current input options:

•	-2- 0.2 Amp Nominal (0.4 Amp continuous)
•	-1- 1 Amp Nominal (2 Amp continuous)
•	-5- 5 Amp Nominal (10 Amp continuous)

Networking Options and Protocols
The Phaser comes with two network options:

•	-F- Fiber-optic, multi-mode, ST connector with Modbus and DNP protocols
•	-485- RS-485 with Modbus and DNP protocols

Programmable Input and Output Options
The Phaser has six different programmable input and output options:

•	-4A1 Four channels of ±1mA analog output signals.
•	-4A20 Four channels of 4-20mA analog output signals.
•	-8A1 Eight channels of ±1mA analog output signals.
•	-8Q Eight digital, optically isolated, open-collector outputs that share a common return.
•	-3KYZ Three isolated digital pulse outputs.
•	-8IO Eight independent, separately configurable inputs or outputs that share a common return terminal.

How to Specify a Phaser Part Number
1. Start with "PHASER".
2. Select the current input required (2, 1, or 5).
3. Select a network port option, if desired (485 or F).
4. Select one I/O option, if desired (4A1, 8A1, 4A20, 3KYZ, 8Q, or 8IO).

Example: A 5 Amp Phaser with an RS-485 network port, and 8 analog outputs. The part number would be written as follows: PHASER-5-485-8A1.

Wind Resource Assessment

Windfarm SCADA

Power Measurement

	Applications
	Important Features
	Product Options
	Specifications
	Certifications
	Contact a Sales Rep


	Phaser Modbus Communications Manual (pdf)
	Phaser DNP Communications Manual (pdf)
	Phaser 4A1 & 4A20 Application Note (pdf)
	Phaser 8A1 Application Note (pdf)
	Phaser 3KYZ & 8Q Application Note (pdf)
	Phaser 8IO Application Note (pdf)